MITMf aims to provide a one-stop-shop for Man-In-The-Middle and network attacks while updating and improving existing attacks and techniques.
The framework contains a built-in SMB, HTTP and DNS server that can be controlled and used by the various plugins, it also contains a modified version of the SSLStrip proxy that allows for HTTP modification and a partial HSTS bypass.
As of version 0.9.8, MITMf supports active packet filtering and manipulation (basically what etterfilters did, only better), allowing users to modify any type of traffic or protocol.
The configuration file can be edited on-the-fly while MITMf is running, the changes will be passed down through the framework: this allows you to tweak settings of plugins and servers while performing an attack.
MITMf will capture FTP, IRC, POP, IMAP, Telnet, SMTP, SNMP (community strings), NTLMv1/v2 (all supported protocols like HTTP, SMB, LDAP etc.) and Kerberos credentials by using Net-Creds, which is run on startup.
Responder integration allows for LLMNR, NBT-NS and MDNS poisoning and WPAD rogue server support.
Follow these instructions to install MITMf on your Kali machine then run mitmf -h to see its options.
Type these commands: mitmf -i wlan0 –spoof –arp –hsts –dns –gateway 192.168.1.1Just change your interface and gateway address you can get your gateway by typing route -n
Press enter to see the magic of mitmf in front of your eyes.
Information keeps on flowing. Oops HSTS is bypassed…
The userid I entered.
I tested it on a SSL-enabled banking page using my mobile phone but look I’m still able to sniff the traffic on plain text. I couldn’t make it work on Facebook, Gmail and Yahoo but I think there’s a lot of secured websites out there that you can still hack with the tool. So test it for yourself and comment below the websites that can work with MITMf. Good luck to your sniffing test!
When I was starting out hacking websites I had hard time finding the administrator pages and I wasted so much time manually finding it by adding robots.txt on the web page. But… here’s the tool to easily find the login page after having the credentials.
Parsero isn’t installed by default in the Kali version so what are you waiting type the above command to keep on going.
Let’s view first the options of the tool after installing and it’s very self explanatory to use.
Look at the output! It clearly show us the important pages of the website. And the Admin page is also there. Good luck!
Medusa is intended to be a speedy, massively parallel, modular, login brute-forcer. The goal is to support as many services which allow remote authentication as possible. The author considers following items as some of the key features of this application.
Thread-based parallel testing. Brute-force testing can be performed against multiple hosts, users or passwords concurrently.
Flexible user input. Target information (host/user/password) can be specified in a variety of ways. For example, each item can be either a single entry or a file containing multiple entries. Additionally, a combination file format allows the user to refine their target listing.
Modular design. Each service module exists as an independent .mod file. This means that no modifications are necessary to the core application in order to extend the supported list of services for brute-forcing.
As with any hacking tool let’s find first the options we can use. Now we know the options what next?
-h (target hostname or IP) -u (victims username) -P (file containing wordlist) -s (Enable SSL) -M (module name) After specifying your target details what are you waiting for? Press Enter.
To make this demo fast because I hate wasting your time I only used 16 password to be tested against the account. As shown on the screen it has successfully found my Gmail password. I also tested Medusa against Yahoo but it failed after a few tries it gets blocked.
In Kali there are few tools to find hidden network or SSID, for example you can use aircrack-ng to view hidden SSIDs but their full network name will stay hidden on the screen unless you deauth a connected client and when it tries to reconnect the networks name will appear. The easiest way to find hidden networks is using a tool called Kismet. Enter command kismet -h to show the options. Type kismet -c wlan1 (depends on your wireless card sometimes wlan0, eth0).
Kismet will ask you if you want to start the server choose Yes
There you go the hidden network was detected!
To know more details on the network same as the picture below just click it. The point here is hiding your network is pretty useless option.
In my previous tutorial I show how to crack WPA password but now let’s downgrade on cracking WEP that is less secure and easier to crack than WPA password, easier than eating popcorn. In cracking WEP password you don’t need to use any wordlist because cracking the key depends on the initialization vectors you’ve captured and the tool will automatically crack the key. Fire up Fern Cracker once again you goddamn bastard!
Choose the wireless card (ex. wlan0, wlan1, eth0)
Scan for wireless APs nearby
When there’s available WEP APs the WEP button will be abled, just click the button and it will open the attack panel.
This panel will show you useful information on the router. – channel, ESSID, BSID. Click your target router, tick the regular attack and on the upper right side click wifi attack. When everything goes smoothly you’ll see the increasing number of IVs like the picture above. Take note that the speed of IVs depends on the connected devices using the network because if they are just connected but not browsing something the attack will be very slow.
27133 IVs and counting still no WEP key but in this world for us to exist, patience is virtue. You can leave it there and watch your favorite tv show.
Alas! the WEP key! a 26-digit key that you can enter as password or if you want you can decrypt the password using online hex to ascii converters. To sum it, if you’re still using WEP change it to more secure WPA/WPA2. There’s another tool that can crack WEP like wifite that I will use in my upcoming tutorials.
Fern Wifi Cracker is a Wireless security auditing and attack software program written using the Python Programming Language and the Python QT Gui Library, the program is able to crack and recover WEP/WPA/WPS keys and also run other network based attacks on wireless or ethernet based networks.
Fern Wifi Cracker currently supports the following features:
WEP Cracking with Fragmentation,Chop-Chop, Caffe-Latte, Hirte, ARP Request Replay or WPS attack
WPA/WPA2 Cracking with Dictionary or WPS based attacks
Automatic saving of key in database on successful crack
Automatic Access Point Attack System
Session Hijacking (Passive and Ethernet Modes)
Access Point MAC Address Geo Location Tracking
Internal MITM Engine
Bruteforce Attacks (HTTP,HTTPS,TELNET,FTP)
First step, make sure your card is capable of packet injection read hereand hereherefor compatible wireless cards. If not there’s no need to follow the instructions below you’ll never crack any wifi password without using compatible cards. Then let’s check your cards interface to use type airmon-ng, mine is wlan1 with ath9k driver. After all let’s kill processes that can intervene with your cards driver type airmon-ng check kill
Run Fern Wifi cracker and choose from the drop down tab the wifi card it will automatically enable the card in monitor mode. See the green text Monitor mode enabled on wlan1mon.
Next click the Scan for Access Points to look for target APs if it detects WEP the wep button will be highlighted if not the WPA, in my case a WPA access point was detected. Now just click the WPA button to open the attack panel where you’ll fulfill your dream of being a wifi hacker.
Select your target access point, tick if it’s regular or wps attack (for wps enabled routers), upload your wordlist to be used in password cracking then click Wifi attack and this tool will magically do everything for you as if you’re having magic wand.
All wifi cracking tools follow these steps – deauth connected clients, capture the handshake and crack the password against your wordlist – wait! here’s the catch, if your wordlist contains the password you can get the password, if not, either get a bigger wordlist or buy faster machine that can bruteforce it without relying on wordlist. The length of time cracking WPA/WPA2 depends on how big is your wordlist and your luck, unlike cracking WEP which depends on IVs captured.
That’s it, the WPA password! There’s a lot of tool in Linux that can crack WPA/WPA2 but Fern Cracker is the easiest to use, thanks to its user friendly GUI.
DMitry (Deepmagic Information Gathering Tool) is a UNIX/(GNU)Linux Command Line Application coded in C. DMitry has the ability to gather as much information as possible about a host. Base functionality is able to gather possible subdomains, email addresses, uptime information, tcp port scan, whois lookups, and more.
The following is a list of the current features:
An Open Source Project.
Perform an Internet Number whois lookup.
Retrieve possible uptime data, system and server data.
Perform a SubDomain search on a target host.
Perform an E-Mail address search on a target host.